radio & speakers
Moderator: Site Administrators
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
radio & speakers
Hi guys I have a couple of questions regarding radio and speakers.
1. When I got my GTX I notice that where my speakers should go there are no holes or any indication of a patern what so ever, is just a flat black cover, but I have 2 spakers mounted inside my trunk. Can any one send me pictures of the way it should look from the insde.
2. Should I put a new CD player in my glove box? (keeping my original radio intact)
3. Would this devaluate my car?
Thank for your help, Steve
1. When I got my GTX I notice that where my speakers should go there are no holes or any indication of a patern what so ever, is just a flat black cover, but I have 2 spakers mounted inside my trunk. Can any one send me pictures of the way it should look from the insde.
2. Should I put a new CD player in my glove box? (keeping my original radio intact)
3. Would this devaluate my car?
Thank for your help, Steve
1971 GTX 440 Four Barrel 4 speed EV2


-
- GTX (RS)
- Posts: 587
- Joined: Wed May 05, 2004 9:48 pm
- Location: Cleveland, the North Coast
Rear speakers
It sounds like your package shelf is without the cutouts. You can buy them with or without.
I bought a new package shelf cardboard piece with the perforated cutouts. Then I placed my rear 6x9 speakers underneath with locking washers and screws. Then I placed the new package shelf on the rear deck and nothing shows.
You may be able to flush mount the 6x9 from the top it the cone edges are not to tall. Then put the package shelf with the perforations back on.
My old set up was the plain cardboard package shelf and previous owner had just cut them dropped in the speakers and put plastic speaker grill covers over them. Looked like crap.
I bought a new package shelf cardboard piece with the perforated cutouts. Then I placed my rear 6x9 speakers underneath with locking washers and screws. Then I placed the new package shelf on the rear deck and nothing shows.
You may be able to flush mount the 6x9 from the top it the cone edges are not to tall. Then put the package shelf with the perforations back on.
My old set up was the plain cardboard package shelf and previous owner had just cut them dropped in the speakers and put plastic speaker grill covers over them. Looked like crap.
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
-
- GTX (RS)
- Posts: 587
- Joined: Wed May 05, 2004 9:48 pm
- Location: Cleveland, the North Coast
Package tray w/speaker grill cutouts
Try Legendary or the Paddock or Year One
Legandary without speaker grill cutouts pt71crwx(c)n $26
with speaker grill cutouts pt71crwx(c)w $41
jute insulation pt71crwxj $10
The cutouts referred to are rectangular perforations that allow the sound to pass into the cabin. Not an oval that is punched out to mount the speaker through.
www.legendaryautointeriors.com
Chris
Legandary without speaker grill cutouts pt71crwx(c)n $26
with speaker grill cutouts pt71crwx(c)w $41
jute insulation pt71crwxj $10
The cutouts referred to are rectangular perforations that allow the sound to pass into the cabin. Not an oval that is punched out to mount the speaker through.
www.legendaryautointeriors.com
Chris
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
- road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
I took my old radio (am/fm) and had it upgraded to new internals. It looks stock, but now I have the EQ, in trunk cd, amp and sub with 2 6x9's out back and 2 4x2's under the dash. The rub is it cost about $1300 to do.
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
- aerodynamic
- GTX (RS)
- Posts: 513
- Joined: Sun Nov 14, 2004 12:05 pm
- Location: Palm Bay Fla
- Contact:
- road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
Yup, the hard wire control, and then the wireless- which i don't use too often. It fits my theme of "look stock, perform better". Gott have killer tunes- that 2watt stock radio just wasn't gitin it done.aerodynamic wrote:You must have a remote for the CD player? That sounds like a nice set-up.
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
Whats the problem? put it in the glove box,sounds like a good idea to me.Don't worry about cutting up the glove box as originals and repros are easy to get.pistol grip wrote:It sounds like a great idea but I would like to put the cd player in my glove box, Does this sounds crazy or am I going to too many car shows and all I see are these kind of cofigurations. HELP, I NEED MUSIC!!!!
BRIAN
Its not numbers matching
It doesn't run on pump gas
And it doesn't purr like a kitten
11.73 at 115mph
It doesn't run on pump gas
And it doesn't purr like a kitten
11.73 at 115mph
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
-
- GTX (RS)
- Posts: 117
- Joined: Tue Aug 15, 2006 1:19 pm
- Location: miami, florida
Personaly I wouldn't like to drill holes under my dash even though it might look very old school-1971 people would know that is not original to the car, If I had another classic in so so conditions, something that I didn't care too much about, I think it would be a GREAT IDEA!
1971 GTX 440 Four Barrel 4 speed EV2


- road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
Hey its your car- if your happy with it- by all means, stash it in the glove box!pistol grip wrote:It sounds like a great idea but I would like to put the cd player in my glove box, Does this sounds crazy or am I going to too many car shows and all I see are these kind of cofigurations. HELP, I NEED MUSIC!!!!
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs