Can anyone recommend a product to repair wallowed holes in stud bosses. Also a few of the bosses are dry rotted cracked. I want to rebuild them.
Who should I buy the stud kit from for the Bubble and the Air Box mount?
Thanks
Air Grabber Bubble Repair- Studs
Moderator: Site Administrators
-
chickendeluxe
- Satellite Coupe (RL)
- Posts: 6
- Joined: Mon May 27, 2013 9:43 am
- My Cars: 72 Road Runner Clone,
1971 SATELLITE SEBRING PLUS 440+6,
1969 Hemi Charger RT,
1968 Hemi Road Runner,
1966 Hemi Belvedere II,
1970 Six Pack Suer Bird,
etc - Location: Silver Spring, MD
-
road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
Re: Air Grabber Bubble Repair- Studs
Couple suggestions:
refill the holes with fiberglass gel and fine chopped glass and re drill
Fiberglass in helicoil's
Glue toothpicks in the holes-
No idea on the stud-kit supplier
refill the holes with fiberglass gel and fine chopped glass and re drill
Fiberglass in helicoil's
Glue toothpicks in the holes-
No idea on the stud-kit supplier
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
-
rr6pak
- GTX (RS)
- Posts: 1007
- Joined: Sun Jan 30, 2005 10:29 pm
- My Cars: 1971 Tor-Red RR
- Location: USA
Re: Air Grabber Bubble Repair- Studs
You can go by the advice of RoadChicken stated. One more thing you can use is a product 9309 which is used in the aircraft industry, basically the same kind of stuff as stated. Contact Wilson Productions for the studs. Exact as the originals. They are the same for the call outs or "boomerangs". Thats how I fixed mine. 