What type of material are most of the splash shields made?

Technical Question and Answer - On topic to 71-74 Plymouth B-bodies only.

Moderator: Site Administrators

Post Reply
User avatar
sdweatherman
Site Admin
Posts: 806
Joined: Tue Sep 14, 2010 2:36 pm
My Cars: 1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car
Location: Rapid City, SD
Contact:

What type of material are most of the splash shields made?

Post by sdweatherman » Tue Sep 13, 2011 11:17 am

Several of the splash shields/guards on our cars are made of a flat rubbery substance about 1/8 of an inch thick. Since I have most of my original pieces, I figure if I found the right material, I could just cut my own new ones. Does anyone know if this material is available for sale at a hardware/auto store - or through someone else? The splash shields i am mainly talking about are the fender/headlight shields and the rear inner fender shields. Thanks in advance!
1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus w/factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus w/factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car

User avatar
Eric
Site Admin
Posts: 2598
Joined: Wed Dec 24, 2003 12:45 am
Location: Central Ohio
Contact:

Re: What type of material are most of the splash shields mad

Post by Eric » Tue Sep 13, 2011 12:56 pm

For the cost, why not just buy a pre-cut set. They're not that expensive.
http://www.detroitmuscletechnologies.com/
Jim's stuff is excellent.
AKA Butterscotch71....the road runner nest is out to win you over this year!Image

User avatar
72RoadRunnerGTX
GTX (RS)
Posts: 594
Joined: Wed Dec 27, 2006 6:44 pm
My Cars: 1972 Road Runner/GTX
1972 Satellite Sebring
1972 Satellite Sebring(big block parts car)
Location: Seattle, Washington

Re: What type of material are most of the splash shields mad

Post by 72RoadRunnerGTX » Tue Sep 13, 2011 11:06 pm

As is all his reproductions, top notch!
Past thread about the splash shields.
Image

User avatar
sdweatherman
Site Admin
Posts: 806
Joined: Tue Sep 14, 2010 2:36 pm
My Cars: 1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car
Location: Rapid City, SD
Contact:

Re: What type of material are most of the splash shields mad

Post by sdweatherman » Wed Sep 14, 2011 12:38 am

Yep, spotted his stuff already. Just exploring all options for saving a dollar here and there. Figured if I could find a suitable material, I could just make them myself. Thanks for the feedback! Scott.
1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus w/factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus w/factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car

User avatar
Diriccatiticka
GTX (RS)
Posts: 101
Joined: Wed Apr 15, 2009 12:56 am
My Cars: 1972 Plymouth Roadrunner
Location: Indiana, USA
Contact:

Re: What type of material are most of the splash shields mad

Post by Diriccatiticka » Fri Sep 16, 2011 10:23 am

I made mine on my daily driver a couple years ago, and probably will make some for my Road Runner here soon.

I used EPDM rubber sheeting for mine. Held up great so far. If you can still piece your old ones together, they make a good stencil. :)

Good luck!
'72 Road Runner
Currently Engineering New Setup! 8)

Ronnman
Satellite Sebring Plus (RP)
Posts: 83
Joined: Wed Apr 25, 2007 9:43 pm
Location: Slidell, LA

Re: What type of material are most of the splash shields mad

Post by Ronnman » Fri Sep 16, 2011 11:29 pm

The material is Masticated Rubber Sheet.
Ron

User avatar
sdweatherman
Site Admin
Posts: 806
Joined: Tue Sep 14, 2010 2:36 pm
My Cars: 1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car
Location: Rapid City, SD
Contact:

Re: What type of material are most of the splash shields mad

Post by sdweatherman » Sun Sep 18, 2011 3:43 am

Thanks for the leads on the materials! I will check them out.
Scott.
1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus w/factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus w/factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car

Post Reply