finally full Rear quarters??? (link of the site)

72RoadRunnerGTX · Post by **72RoadRunnerGTX** » Thu Dec 11, 2008 7:53 pm

I did verify with the Ebay seller that they were AMD pieces, sounded like he was having them drop-shipped from directly from AMD.

sogtx · Post by **sogtx** » Sat Dec 13, 2008 7:37 am

i looked at them and then i looked at my nos one , i dunno .. id still try to finda used set ..

how a bout trunk extensions >>>

72 RR fan · Post by **72 RR fan** » Sun Dec 14, 2008 11:01 am

sogtx wrote:i looked at them and then i looked at my nos one , i dunno .. id still try to finda used set ..

how a bout trunk extensions >>>

What's your beef with them, specificly? I have been kinda waiting on the panels....

ct71rr · Post by **ct71rr** » Mon Dec 15, 2008 11:41 am

I emailed AMD yesterday and received a response today. Alan from AMD stated that they are NOT ready yet and will be available in Feb. '09. They are waiting final approval on test piece.

ryangtogtx · Post by **ryangtogtx** » Tue Dec 16, 2008 1:37 pm

ct71rr wrote:I emailed AMD yesterday and received a response today. Alan from AMD stated that they are NOT ready yet and will be available in Feb. '09. They are waiting final approval on test piece.

I chuckled to myself when I read this. I'm guessing Feb. '09 means June of ?????

Post by **Eric** » Wed Dec 17, 2008 1:10 pm

I'd imagine that ebay vendor will get some negative feedback when his customers find out he's selling something that isn't available yet!

ct71rr · Post by **ct71rr** » Thu Dec 18, 2008 11:52 am

I was hoping for a festivus miracle but, it was not to be

...until Feb '09 that is!

G-Series · Post by **G-Series** » Sat Dec 20, 2008 1:12 pm

I wanted you guys to know what's going on with the quarters etc... I've been doing the test fitting for AMD on all the 71-2 RR and Charger pieces. We've got one more, hopefully, test fit before they can be released for sale(RR stuff). Quarters, front and rear valances etc.. Hang in there, it'll be worth the wait. AMD is dedicated to making sure each piece is the best it can be. I'll keep you guys informed as to which pieces you can expect to see in the weeks and months ahead.

ct71rr · Post by **ct71rr** » Sat Dec 20, 2008 7:04 pm

Thanks for the info!

By the way, your cars are awesome!!! Where abouts in Mass are you located? I live in the Framingham area.

Post by **Eric** » Sat Dec 20, 2008 8:16 pm

G-Series wrote:I wanted you guys to know what's going on with the quarters etc... I've been doing the test fitting for AMD on all the 71-2 RR and Charger pieces. We've got one more, hopefully, test fit before they can be released for sale(RR stuff). Quarters, front and rear valances etc.. Hang in there, it'll be worth the wait. AMD is dedicated to making sure each piece is the best it can be. I'll keep you guys informed as to which pieces you can expect to see in the weeks and months ahead.

Hey Gary
So you finally let the cat out of the bag here! By the time Gary is done test fitting these items, I'm sure they'll be as good or better than NOS!

G-Series · Post by **G-Series** » Sat Dec 20, 2008 8:51 pm

ct71rr, I'm in Sharon, and thanks. Eric: I figure you guys have waited for so long, you needed the 'final' word. I know it's hard to plan your resto when the availability date keeps moving. So ignore the rumors...I'll let you know the real scoop on availability right here.. I got to say, seeing new front and rear valances, trunk floors, extensions, quarters, trunk drip rails..even in their 'almost' ready for sale state is awesome. Cat out of the bag? You guys know about the Plymouth Exterior Styling studio?

Two posts in one day...must have snowed here today

CtownRunner · Post by **CtownRunner** » Sun Dec 21, 2008 10:37 am

Thanks Gary, really appreciate the straight info.

ct71rr · Post by **ct71rr** » Mon Dec 22, 2008 3:48 pm

G-Series, any chance you could post some pics of the test fits?? I'll be your best friend!!!

G-Series · Post by **G-Series** » Mon Dec 22, 2008 11:18 pm

Can't do that, but I will say that the 'final' 71 rear valance(both with and w/out duals) and the front valance will be here this week for fitting. The last fit for the rear valances only required about an 1/8" adjustment to the overall width.. otherwise it's perfect. The front was a first fit and needed a bit more. I'll let you know if they are a 'go'. If so, you should be seeing them in about a month or so. Another piece that got the OK is the ECS hose and tank shields at the left rear. Both the hose shield and the tank shield. Dutch panel, trunk floor and extensions were already cleared for fitment. Quarters are due shortly for final fit.

Serious Satellite · Post by **Serious Satellite** » Tue Dec 23, 2008 12:40 am

Well geez, the 73's and 74's are now the ugly red headed step children of the restoration world. . .

but it is good news on the 71's and 2's.

Road Runner Nest

finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)

Re: finally full Rear quarters??? (link of the site)