Help With 71-72 Hood Insert Attachment
Posted: Wed May 02, 2018 2:57 pm
Hey, all. I've been away from the nest for a few months - got used to it being down back in January or so. The good news is I'm nearing the end of my exterior restoration work. Just have to prime the marker bezels, the hood inserts and the mirrors, then yank the engine, scuff the engine compartment, and head to the paint bay.
When I took the hood inserts off, I found that the outboard fasteners were missing, and the bosses holding the studs are pretty beat-up. I'm going to use SMC repair compound to rebuild the bosses and cement in new studs. But I have no idea what goes on these studs on the bottom side of the hood. The inboard studs just have swivel-flange nuts.
Can someone describe or better yet get a couple pics of the outboard attachment hardware? I guess it might be hidden by the insulation pad.
Thanx,
Mark
When I took the hood inserts off, I found that the outboard fasteners were missing, and the bosses holding the studs are pretty beat-up. I'm going to use SMC repair compound to rebuild the bosses and cement in new studs. But I have no idea what goes on these studs on the bottom side of the hood. The inboard studs just have swivel-flange nuts.
Can someone describe or better yet get a couple pics of the outboard attachment hardware? I guess it might be hidden by the insulation pad.
Thanx,
Mark