Adding A/C, need help with brackets, pulleys, belts
Posted: Sat Jun 25, 2016 9:54 pm
Hi all, I'm adding A/C back to my factory air 71 with 440 and need a good diagram or photos of the final product, specifically the alternator mount/bracket(s), strap, idler pulley and belts. I have an alternator strap which is 13-3/8" in overall length. I also have a cast iron alternator mount which bolts to the RH cylinder head. This seems to put the alternator way out towards the RH fender. I hope I don't have C-body parts or something! I also have an two idler pulleys; (1) is heavy cast, the other seems to be stamped steel, not sure which is correct for 71. Any help appreciated!