Page 1 of 1

windshield washer questions

Posted: Thu Apr 09, 2015 6:04 am
by dangina
looking for the washer spray nozzles for my 71 runner, can't seem to find any, are these what I need? is there anything else I may be missing?

http://www.ebay.com/itm/NEW-Mopar-1971- ... 97&vxp=mtr

also if anyone has a pic of where they need to be mounted, that would be great too!!!

Curious, how does the windshield washer motor stay in the washer bottle, I bought a repo motor and bottle from year one but the motor isn't seated all the way on the bottom of the bottle and will probably just leak everywhere, has anyone bought these and experienced the same thing? if I get time I may take a pic to explain what I mean.

Re: windshield washer questions

Posted: Thu Apr 09, 2015 9:18 am
by 71bird
Those look like the right nozzles, but I'm not 100%. The pump is held in the tank by a plastic nut with a cone shaped filter from the inside.

Re: windshield washer questions

Posted: Fri Apr 10, 2015 1:37 am
by dangina
this is what I have:

Image
Image

does one have in thread the filter on inside the container? if so, thats one long extension!!!

Re: windshield washer questions

Posted: Fri Apr 10, 2015 8:54 am
by 71bird
The nut goes inside the bottle

Re: windshield washer questions

Posted: Sun Apr 12, 2015 5:40 pm
by dangina
71bird wrote:The nut goes inside the bottle
thanks! needed a large extension to get that on there :)

Re: windshield washer questions

Posted: Mon Apr 13, 2015 6:09 pm
by rradar71
dangina wrote:
71bird wrote:The nut goes inside the bottle
thanks! needed a large extension to get that on there :)
Or you could put two shorter ones together.