Road Runner Nest

I was wondering if anyone has a source for the horn pads for an original 71 roadrunner steering wheel type.(not the tuff Wheel) My horn has been hooked to an auxiliary switch since I bought the car over 20 years ago. It is a three spoke wheel horn pads (buttons) toward end of spokes. I never tried rewiring, I just assume they are bad. Any advise?

You might try looking at a black wire on the turn signal switch harness. If its the same as my ssp, the black wire goes up behind steering wheel and hooks to a spring plunger or what ever you call it, that comes in contact with a ring on the wheel. Assuming the relay is ok, it may be that the spring is broken or the contact is dirty (if all three contact pads don't work).

NOS ones pop up on ebay frequently...also used.

http://www.ebay.com/itm/1971-1972-1973- ... 80&vxp=mtr

http://www.ebay.com/itm/1971-74-ROADRUN ... 51&vxp=mtr

One Genuine NOS MoPar 1971-73 Chrysler Steering Wheel Horn Switch Assembly

PN 3575954 same as PN 3620872

This replaces the electrical switch setup in all 1971-73 three spoke steering wheels. This repair package will renew your corroded and sticky original.

http://pages.ebay.com/link/?nav=item.vi ... 0674395694