horn pads

[RobsRR]

I was wondering if anyone has a source for the horn pads for an original 71 roadrunner steering wheel type.(not the tuff Wheel) My horn has been hooked to an auxiliary switch since I bought the car over 20 years ago. It is a three spoke wheel horn pads (buttons) toward end of spokes. I never tried rewiring, I just assume they are bad. Any advise?

[rradar71]

You might try looking at a black wire on the turn signal switch harness. If its the same as my ssp, the black wire goes up behind steering wheel and hooks to a spring plunger or what ever you call it, that comes in contact with a ring on the wheel. Assuming the relay is ok, it may be that the spring is broken or the contact is dirty (if all three contact pads don't work).

[Eric]

NOS ones pop up on ebay frequently...also used.

http://www.ebay.com/itm/1971-1972-1973- ... 80&vxp=mtr

http://www.ebay.com/itm/1971-74-ROADRUN ... 51&vxp=mtr

[71Satellite98661]

One Genuine NOS MoPar 1971-73 Chrysler Steering Wheel Horn Switch Assembly

PN 3575954 same as PN 3620872

This replaces the electrical switch setup in all 1971-73 three spoke steering wheels. This repair package will renew your corroded and sticky original.

http://pages.ebay.com/link/?nav=item.vi ... 0674395694