Interior door panel "hooks"
Moderator: Site Administrators
-
- GTX (RS)
- Posts: 280
- Joined: Sun Apr 21, 2013 7:14 pm
- My Cars: 71 Satellite
70 Challenger
07 300C SRT8
13 Ram C/V (Caravan) work-issued - Location: Vancouver, WA
Interior door panel "hooks"
Are these galvanized "hooks" installed correctly for the rear door panels? They seem to be holding the panels quite high. I notice the locating tabs that seem to line right up with holes in the structrure. The fronts ended up a tad high an a tiny adjustment by bending them towards the glass about an 1/8" did the trick but these seem way off. Then again, these may possibly be 73/74 rears covered in 71 uphostery.
- sdweatherman
- Site Admin
- Posts: 795
- Joined: Tue Sep 14, 2010 2:36 pm
- My Cars: 1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus factory Sunroof
1974 KB5 Plymouth Road Runner GTX Dealer Announcement car - Location: Rapid City, SD
- Contact:
Re: Interior door panel "hooks"
Looks like they need to be switched around so the small hook portion of the brackets faces the outside of the door. Here is a picture of a door that has not been disassembled.
1971 GY8 Plymouth Satellite Sebring Plus
1971 GB7 Plymouth Satellite Sebring Plus w/factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus w/factory Sunroof
1971 GB7 Plymouth Satellite Sebring Plus w/factory Sunroof
1972 EV2 Plymouth Satellite Sebring Plus w/factory Sunroof
-
- GTX (RS)
- Posts: 280
- Joined: Sun Apr 21, 2013 7:14 pm
- My Cars: 71 Satellite
70 Challenger
07 300C SRT8
13 Ram C/V (Caravan) work-issued - Location: Vancouver, WA
Re: Interior door panel "hooks"
Many thanks sdweatherman! Your picture is worth a thousand words!