Page 1 of 1
Air Grabber Bubble Repair- Studs
Posted: Tue Jul 30, 2013 8:40 am
by chickendeluxe
Can anyone recommend a product to repair wallowed holes in stud bosses. Also a few of the bosses are dry rotted cracked. I want to rebuild them.
Who should I buy the stud kit from for the Bubble and the Air Box mount?
Thanks
Re: Air Grabber Bubble Repair- Studs
Posted: Tue Jul 30, 2013 9:58 pm
by road chicken
Couple suggestions:
refill the holes with fiberglass gel and fine chopped glass and re drill
Fiberglass in helicoil's
Glue toothpicks in the holes-
No idea on the stud-kit supplier
Re: Air Grabber Bubble Repair- Studs
Posted: Wed Jul 31, 2013 9:39 am
by rr6pak
You can go by the advice of RoadChicken stated. One more thing you can use is a product 9309 which is used in the aircraft industry, basically the same kind of stuff as stated. Contact Wilson Productions for the studs. Exact as the originals. They are the same for the call outs or "boomerangs". Thats how I fixed mine.
