I just picked up the little inspection plate that bolts to the bottom of the converter dust shield and noticed that there are 2 larger bolt holes up the side of the shield that don't have bolts in them. I found the following image that shows a bracket of some kind on the hole on the right.
Any idea what that bracket is? Just want to make sure I'm not missing something here.
Transmission/Converter Dust Shield
Moderator: Site Administrators
-
- Road Runner (RM)
- Posts: 46
- Joined: Wed Jan 14, 2009 9:56 pm
Re: Transmission/Converter Dust Shield
looks like the trans to engine bracket used on small block cars.
clem
clem