Bought a 72 new yorker hood release from inside the car and need a pic where the cable meets the actual mechanism -Just wanted to know where the loop assembly was mounted to-
Also the route in which it runs would also help
Couldnt find any pics in a search i did
72Satellite440-Dan
Hood latch release
Moderator: Site Administrators
-
72Satellite440
- GTX (RS)
- Posts: 166
- Joined: Thu Apr 29, 2010 1:13 am
- My Cars: 1972 Plymouth Sebring plus
- Location: Ontario, Canada
Hood latch release
72-SaTeLliTe440-Dan
-
72RoadRunnerGTX
- GTX (RS)
- Posts: 594
- Joined: Wed Dec 27, 2006 6:44 pm
- My Cars: 1972 Road Runner/GTX
1972 Satellite Sebring
1972 Satellite Sebring(big block parts car) - Location: Seattle, Washington
Re: Hood latch release
Found this shot on ebay of the correct cable release latch. Cable is routed out along the inner fender with the forward lighting harness through the core support and looping down then up to the latch.
If security is a concern, don't forget the guard to block access to the release from the grille area.
If security is a concern, don't forget the guard to block access to the release from the grille area.
-
72Satellite440
- GTX (RS)
- Posts: 166
- Joined: Thu Apr 29, 2010 1:13 am
- My Cars: 1972 Plymouth Sebring plus
- Location: Ontario, Canada