Page 1 of 1
Radiator Fan Shroud
Posted: Mon Aug 01, 2011 8:32 pm
by 74roadbird
This was part of my other post (Windshield) that you guys helped with. I have a Champion 22" 3-core aluminum radiator that I need a shroud for. If the mounting holes in "stock" style shrouds are 22" across they are 12 3/4 top to bottom. Any I have seen that are 15 1/4 top to bottom seem to be for 29" across. Anybody have any leads? By the way, I found a divorced choke that should work out. 2 out of 3 ain't bad, if it were a song.
Re: Radiator Fan Shroud
Posted: Tue Aug 02, 2011 6:06 am
by quapman
73-later b-bodies came with optional 28" rads. Maybe a shroud from one of those wold work.
Re: Radiator Fan Shroud
Posted: Wed Oct 05, 2011 2:37 pm
by 72Satellite440
Uploaded with
ImageShack.us[/img]
Bought off e-bay - took a little tweeking but looks good works perfect with my Alum Champion rad
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0546953390
72Satellite440-Dan
Re: Radiator Fan Shroud
Posted: Wed Oct 05, 2011 8:05 pm
by rradar71
About that shroud on E-bay. The post states that it is for a big block and the mounting holes measure 12 1/4`inches x 26 inches apart. I just measured two shrouds from 318 cars and got the same measurements. Both shrouds are from air conditioned cars. I was wondering if they were inter-changeable with the one on E-bay or what.
