Pozzi for 73-74 RR

[73nohemi]

Will any b-body 8 3/4 rear end fit in a 73 runner or does it have to be a 73-74 rear end. I want to get a wiggle when i get on it. LOL

[72Satellite440]

We refer it to "Suregrip" not pozzi
If you can find one of our cars 71-74 otherwise theres a list below of compatable rear ends

http://members.tripod.com/mojo_page/chry875.htm

Body Year Track Perches

A-body, 65-72 55.6 43.0 4" lug bolt circle offered in heavy duty apps.
B-body, 62-70 59.2 44.0
B-body, 71-72 62.0 47.3
B-body, 71-72 63.4 47.3 station wagon
C-body, 64-72 63.4 47.3
D-body, 64-72 63.4 47.3
E-body, 70-74 60.7 46.0


72Satellite440-Dan

[73nohemi]

sorry i dont know alot about the mopars even though i have had the car for 8 years its amazing how much i need to learn. thanks for the info.

[quapman]

Pozzi? I think I had a pizza from there once.

Nice rear end reference, thanks, 72Satty.

[Dave]

Just as a point of reference - 71/72s used a different sized alignment pin on the spring perch than the 73/74s. Obviously not a major challenge to overcome swapping from one to the other, but an important note. Sitting here, I can't remember which was larger vs. smaller - but I THINK 73/74s were larger.

Of course, if your car already has an 8 3/4 in it, it's a pretty simple swap to a different pig with whatever gear you like + sure-grip.

[quapman]

Yes, the later cars had the larger holes in the spring perches due to the rubber isolated suspension introduced in the 73 model year.

[Hugh]

Yes, the later cars had the larger holes in the spring perches due to the rubber isolated suspension introduced in the 73 model year.

I eliminated the rubber isolators and went solid like 71-72. Best thing I ever did!!!