Road Runner Nest

Ok the guy I bought my roadrunner from has a 4bbl air cleaner which looks excatly like the six pack but without 3 holes for each carb. And I didn't even know they had just plain 4bbl cleaners like that and was wondering if the dimensions are same like the top lid and the base. I'm going to buy it anyways since I've been looking for one since I liked Mopars oval air cleaners .

I purchased one that I think was on a 69 RR. It is too high for my hood clearance with the airgrabber. My brother has offered to cut it down for me, but I would have to kill him. I am going to start looking for the 71-72 lower air cleaner base plate.

At one time someone posted pictures of the low profile one.

Dennis

that is a 69 one in the pic that you have


go here http://www.nicksgarage.com/aircleaner.htm

Well what is the opening for the carb hole? Because I'm wondering now if it will sit on a Edelbrock 650cfm because I not sure what size the Thremoquads openings were.

71 440 4bbl use 750 avs same as Edelbrock 650cfm

71 340 use a Thremoquad


72 400 340 Thremoquad

72 440 a 600 holley

so will fit them all

71440 gtx wrote:that is a 69 one in the pic that you have


go here http://www.nicksgarage.com/aircleaner.htm

Thanks for the great info,I will have to measure mine to see which one I have.

Good! I have the 2-3/4 one for the 383.

i do have the 70 72 340 440 one

hard to find

71440 GTX You wouldn't by any chance want to trade so I could have one that would fit an air grabber if I get it would ya .

Mo Power wrote:71440 GTX You wouldn't by any chance want to trade so I could have one that would fit an air grabber if I get it would ya .

i need it for my gtx

Dang it I was hoping you had an extra because I would love to have an air grabber in the sometime future and I would need it .