Page 1 of 1

Is this the correct jack for "71 RR???

Posted: Fri Jan 04, 2008 12:41 am
by ct71rr
Hello all,

Is this the correct jack for a "71 Road Runner???

Auction

Thanks in advance!!!

Posted: Fri Jan 04, 2008 6:42 am
by CtownRunner
U will need the part number from the "hook" to verifiy it's correct for 71 RR. Do not have the part number handy at the moment, Ask the seller what the # is on the hook and post it here. Someone will verifiy if it's correct or not.

Posted: Fri Jan 04, 2008 9:27 am
by bruce
I agree, you'd need the part number to know for sure. FWIW, the ORIGINAL hook on my RR's jack is green. If this one is the correct part number I think it's been incorrectly restored. I think all the '71 hooks were green. Someone correct me if I'm wrong!

Jack

Posted: Fri Jan 04, 2008 10:25 am
by rr6pak
I found a good, restored jack. Everything had been repainted. The guy who I bought it from showed me pix of before and after. I think the hook was green because this hook I bought that came with the whole assy. was and is green. If nowone post the P/N, I'll take a look and post it. I did check the # on the hook before I bought it and the parts book said it was for the '71 RR/Sat.
:beer:

71 b-body

Posted: Fri Jan 04, 2008 12:02 pm
by 71440 gtx
hi the jack hook number #3436 960 :beer:

yes it green

Posted: Fri Jan 04, 2008 12:36 pm
by Dave
Yea, they were green, but not always the same color. Of the collection of correct 71 jacks I have, there are at least 3 different colors, and 2 different stamping styles for the Pentastar. I really should go dig them up and post a pic of them all side by side.

Posted: Fri Jan 04, 2008 1:17 pm
by Eric
I've also seen a couple originals in gray....same color as the base. AND one with no part number at all (from an original rubber bumper car)....otherwise it looked the same

Posted: Fri Jan 04, 2008 4:05 pm
by 1carcrazyguy
This may or may not help, but here is the jack on my low mileage 71 Sat.

Posted: Fri Jan 04, 2008 8:41 pm
by Eric
Looking at that ebay jack again, it clearly is not the correct hook. It's shorter, doesn't round back at the top and only has one large rivet/post instead of two....

Posted: Fri Jan 04, 2008 10:01 pm
by ct71rr
Thanks for all the info guys :beer: . The seller told me the part number is 2460148. I guess it is not the correct one...I'll keep looking....