Page 1 of 1

wheelarch repair

Posted: Sat Jul 28, 2007 3:44 pm
by roelbest
This might be a stupid question, but can the front wheelarch lip be used to repair badly rusted rear arch bits? I have a set of nos front fenders for my ' 72 RR , but the lip on the old fenders are ok, I was hoping to cut that and repair the rear lip, which is badly rusted, as per pic.
thanks for any help

Posted: Sat Jul 28, 2007 3:56 pm
by 1bluegtx
Yes they can.

BRIAN

Posted: Sat Jul 28, 2007 3:58 pm
by roelbest
Thanks Brian, I really appreciate the help, I am a bit stuck here on the small island for that type of advice :wink:

Front to Back Side to Side

Posted: Sat Aug 04, 2007 11:49 pm
by scottish440
On the subject of using the front fender to patch with....

the lower rear quarter can be patched with the front fender (using the section in front of the wheel) the drivers side will patch the pass side rear...and so on...

never really rusts there either...take care all.... scott

Posted: Sun Aug 05, 2007 2:57 pm
by roelbest
thanks Scott!!