most of the harnesses posted in this thread are from YO! M&H sells direct to YO.rr6pak wrote:Doesn't YO sell a harness with the electronic conversion? I think it is basically the same harness. When I have the time, guess I'll have to check with them.72RoadRunnerGTX wrote:Fairly easy conversion, done it many times, will need the conversion harness that comes with the kit, or can be purchased separately. Done correctly, can’t tell it wasn’t factory.
Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
Moderator: Site Administrators
-
- GTX (RS)
- Posts: 394
- Joined: Sat Feb 12, 2011 12:28 am
- My Cars: 71 roadrunner
- Location: lethbridge, ab
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
400 stroked to 470ci, 3:55 Eaton true trac, slightly upgraded suspension lol
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus
- rr6pak
- GTX (RS)
- Posts: 1007
- Joined: Sun Jan 30, 2005 10:29 pm
- My Cars: 1971 Tor-Red RR
- Location: USA
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
Does anyone have a picture or two of where the dash grounds are? Mine's been apart waaaay to long 

- 72RoadRunnerGTX
- GTX (RS)
- Posts: 594
- Joined: Wed Dec 27, 2006 6:44 pm
- My Cars: 1972 Road Runner/GTX
1972 Satellite Sebring
1972 Satellite Sebring(big block parts car) - Location: Seattle, Washington
- rr6pak
- GTX (RS)
- Posts: 1007
- Joined: Sun Jan 30, 2005 10:29 pm
- My Cars: 1971 Tor-Red RR
- Location: USA
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
I see the ground. Is that a "J" clip or something that the screw screws into? Looks like some sort of sheet metal screw. Thanks
- 72RoadRunnerGTX
- GTX (RS)
- Posts: 594
- Joined: Wed Dec 27, 2006 6:44 pm
- My Cars: 1972 Road Runner/GTX
1972 Satellite Sebring
1972 Satellite Sebring(big block parts car) - Location: Seattle, Washington
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
Yes and yes, with a large flat area Philips head.

-
- GTX (RS)
- Posts: 268
- Joined: Tue Jan 22, 2013 1:32 pm
- My Cars: 71 GTX
72 cuda repli-mod - Location: S. E. Michigan
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
Interesting approach to the wiring harness problem - nothing is labeled. I took a different cut at it over the last year. I have the shop manuals for both 71 and 72. I bought the following harnesses for my 71 GTX with 4 BBL and electronic ignition:
Dash
Engine (modified for electronic ignition)
Forward lighting
Rear Lighting (This harness itself does not connect to much of the rear lighting except the left side marker. There is another harness that plugs into it and picks up the tail lighting and RH marker. Nobody seems to make that one.)
Anyway, using the electrical schematics I made a sort of drawing of each harness, and annotated them according to the notation used in the schematics, which gives wire number, wire gauge, and color. Mostly, I left out the gauge, unless it was large wire. They're color coded, and a key is included on the dash harness drawing.
The people who drew these schematics, especially the IP schematic, weren't overly concerned about making them easy to follow.
Myb drawings are multiple pages. I scanned them to create PDF files for each. Can't attach, but would be happy to send to anyone who wants them. PM me.
Also, if anyone needs any schematics for 71 or 72, PM me and I'll get it to you.
Dash
Engine (modified for electronic ignition)
Forward lighting
Rear Lighting (This harness itself does not connect to much of the rear lighting except the left side marker. There is another harness that plugs into it and picks up the tail lighting and RH marker. Nobody seems to make that one.)
Anyway, using the electrical schematics I made a sort of drawing of each harness, and annotated them according to the notation used in the schematics, which gives wire number, wire gauge, and color. Mostly, I left out the gauge, unless it was large wire. They're color coded, and a key is included on the dash harness drawing.
The people who drew these schematics, especially the IP schematic, weren't overly concerned about making them easy to follow.
Myb drawings are multiple pages. I scanned them to create PDF files for each. Can't attach, but would be happy to send to anyone who wants them. PM me.
Also, if anyone needs any schematics for 71 or 72, PM me and I'll get it to you.
-
- Satellite Coupe (RL)
- Posts: 1
- Joined: Mon Jul 27, 2020 9:49 pm
- My Cars: 1971 Plymouth Road Runner
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
Kind of reviving an old post but, has anyone found the rest of the rear lamp harness or who makes it? I have the M&H Rear Lamp Harness but can't find the brake lights, backup lights and right side marker light.
-
- GTX (RS)
- Posts: 394
- Joined: Sat Feb 12, 2011 12:28 am
- My Cars: 71 roadrunner
- Location: lethbridge, ab
Re: Ultimate Wiring Picture Guide 71 Plymouth / Dodge Bbody
So far I have been unable to find anyone that makes the harness you speak of

400 stroked to 470ci, 3:55 Eaton true trac, slightly upgraded suspension lol
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus