Domelight switch question

73sunroofSSP · Post by **73sunroofSSP** » Wed Jul 30, 2008 6:05 pm

On my car the drivers side door switch for the domelight uses a 3prong connector while the pass one only uses a 2blade connector.WHY? What else does it control? None of the replacment switches are 3prong connectors only 2blade connectors. Does anyone have a spare or two thanks

73sunroofSSP · Post by **73sunroofSSP** » Wed Jul 30, 2008 9:11 pm

Ok I restudied the wiring diagram and think I figured out that the drivers side doorjamb domelight switch also operates the key buzzer. Where can I get the proper switch at though?

landon1 · Post by **landon1** » Wed Jul 30, 2008 9:38 pm

yep...has to be the key buzzer - i may be wrong, but the switch may be the same as the e-body switch, which is reproduced

73sunroofSSP · Post by **73sunroofSSP** » Wed Jul 30, 2008 10:00 pm

the only ones in the year one catalog and I checked some other places only the ones blade connectors. I'd rather not have to modify a new harness to make them work also most are to small. I have the large nut style.

71_DEPUTY · Post by **71_DEPUTY** » Thu Jul 31, 2008 9:30 am

3 PINS

1- key in buzzer & headlights on
2- time delay ign. lamp
3-dome light

it's a 70, 71, 72, 73 switch- most had the two prong one but if you had the options of the time delay you got the 3 pin one!!!

seen them on Darts, Chally, Cudas, b-bodies and c-bodies.

you have to find them a swap meets or scrap yards!!!

73sunroofSSP · Post by **73sunroofSSP** » Thu Jul 31, 2008 11:26 am

71_DEPUTY wrote:3 PINS

1- key in buzzer & headlights on
2- time delay ign. lamp
3-dome light

it's a 70, 71, 72, 73 switch- most had the two prong one but if you had the options of the time delay you got the 3 pin one!!!

seen them on Darts, Chally, Cudas, b-bodies and c-bodies.

you have to find them a swap meets or scrap yards!!!

Thank you 71 DEPUTY

71_DEPUTY · Post by **71_DEPUTY** » Thu Jul 31, 2008 8:20 pm

YOUR WELCOME!

John Mac