3/8" gas tank pick up/ sending unit with return line
Moderator: Site Administrators
- road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
3/8" gas tank pick up/ sending unit with return line
If anyone buys one of these units that has a return line fitting that isn't used, make sure to seal off the return line with a cap that is rated for use with fuels. Had a rude awaking today- two years after installing mine. Filled the tank and went in to pay for the fuel. When I came back out there was fuel pissing all over the tailpipes while the car was sitting next to the pumps. First order of business was to push the car away from the pumps, ( would be bad enough to lose the car but worse to take a gas station with it). When I crawled underneath to find the leak, the cap that came with the sending unit to seal off the return line fitting just disintegrated in my hand. Thankfully the car had cooled down while I was digging around my storage unit for 15 minutes before I drove the mile to the fuel station- so the pipes were relatively cool and didn't flash start the gas on fire.
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
-
- GTX (RS)
- Posts: 394
- Joined: Sat Feb 12, 2011 12:28 am
- My Cars: 71 roadrunner
- Location: lethbridge, ab
Re: 3/8" gas tank pick up/ sending unit with return line
scary stuff!!!
400 stroked to 470ci, 3:55 Eaton true trac, slightly upgraded suspension lol
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus
BUILD THREAD!!!! http://www.protouringmopar.com/showthread.php?796-1971-Speedipus-Rex&highlight=speedipus
- road chicken
- GTX (RS)
- Posts: 668
- Joined: Thu Oct 09, 2003 11:21 pm
- Location: SE WI
Re: 3/8" gas tank pick up/ sending unit with return line
Lets just say it got my undivided attention in big hurry ! its all good, I just don't want to see it happen to anyone else...especially with a hot exhaust!!
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs