Page 13 of 35
Re: Startin to work on the Clone Runner
Posted: Sun Mar 24, 2019 4:26 pm
by 71Beeper
Re: Startin to work on the Clone Runner
Posted: Sun Mar 31, 2019 10:54 am
by 71Beeper
Yesterday, I started on the front suspension. the torsion bars came out easier than I thought.
- March 30 (6).jpg (75.67 KiB) Viewed 16345 times
- March 30 (7).jpg (79.14 KiB) Viewed 16345 times
Having the proper tool certainly helped.
- 20190324_141930.jpg (91.86 KiB) Viewed 16345 times
Then, the 4 bolts holding the front K-member were next. I had to use the big bertha to crack them free.
- March 30 (12).jpg (73.21 KiB) Viewed 16345 times
The result.......it's out!
- March 30 (14).jpg (107.77 KiB) Viewed 16345 times
Re: Startin to work on the Clone Runner
Posted: Sun Mar 31, 2019 10:57 am
by 71Beeper
Now I know where some of the glass bead ended up........
- March 30 (10).jpg (93.66 KiB) Viewed 16345 times
Re: Startin to work on the Clone Runner
Posted: Sun Mar 31, 2019 10:59 am
by 71Beeper
More glass bead.......
- March 30 (8).jpg (114.64 KiB) Viewed 16345 times
Re: Startin to work on the Clone Runner
Posted: Sat Sep 21, 2019 9:11 pm
by 71Beeper
So......since the end of March I've been on the hunt for a reputable body and paint shop.
I finally found one.
A friend of a friend had his Nova painted there. Here's a picture of it in the spray booth.
- IMG-20190829-WA0042.jpg (154.25 KiB) Viewed 15959 times
So I contacted this friend and had him bring the body guy to my house to look at the Runner.
He came and said yes he will do it - we agreed on a price and on Aug 26th the journey began.
Here it is getting ready to load up on a trailer.
- Aug 26 (13).jpg (127.09 KiB) Viewed 15959 times
I used a small trailer that I have for my wife's Mini Cooper.
- Aug 26 (17).jpg (204.79 KiB) Viewed 15959 times
With the car being on dolly wheels, there was no issues getting it on the trailer.
Plus it is lighter than the Mini at this stage, so trailering it to the body shop was no issue.
- Aug 26 (22).jpg (261.21 KiB) Viewed 15959 times
Here's the full AMD quarters, outer wheel housings and trunk extensions plus rear valance and going to the body shop.
- Aug 26 (18).jpg (159.11 KiB) Viewed 15959 times
Re: Startin to work on the Clone Runner
Posted: Sat Sep 21, 2019 9:20 pm
by 71Beeper
I had taken the doors down to the shop separately as they would not fit in the Caravan with all the other pieces in it.
The shop started on the doors.
- IMG_5410.jpg (59.88 KiB) Viewed 15959 times
- IMG_54091.jpg (66.39 KiB) Viewed 15959 times
So in the meantime I have to get started on the hood.
The underside needs blasting & the hole for the air grabber needs doing.
So,,, lets get started on the air grabber hole.
- Aug 26 (35).jpg (80.65 KiB) Viewed 15959 times
Put on some masking tape.
- Aug 26 (33).jpg (91.29 KiB) Viewed 15959 times
Carefully lay out the locations for the fasteners.
- Aug 26 (35).jpg (80.65 KiB) Viewed 15959 times
Re: Startin to work on the Clone Runner
Posted: Sat Sep 21, 2019 9:25 pm
by 71Beeper
Hopefully all of my hole locations are correct.
Next fire up the hole saw cutter.
- 20190901_163307.jpg (99.52 KiB) Viewed 15959 times
Then cut out the center.
- 20190902_152857.jpg (100.06 KiB) Viewed 15959 times
Drill the mounting holes and that part of the job is done.
Next, it's time to clean up the underside. First I took some pictures of some factory markings that were still there.
- Sept 14 (2).jpg (91.21 KiB) Viewed 15959 times
- Sept 14 (1).jpg (75.6 KiB) Viewed 15959 times
Here's the underside before blasting.
- Sept 15 (2).jpg (113.89 KiB) Viewed 15959 times
Re: Startin to work on the Clone Runner
Posted: Sat Sep 21, 2019 9:33 pm
by 71Beeper
Time to blast.
BTW I did the blasting outside of my garage with the hood up against the big garage door.
I placed a 6mil vapour barrier plastic sheet between the door and hood.
- Sept 15 (3).jpg (85.19 KiB) Viewed 15958 times
- Sept 15 (5).jpg (49.25 KiB) Viewed 15958 times
I only did half the underside on that day as I didn't realize how long it actually took.
Then sprayed some primer.
- Sept 15 (9).jpg (60.5 KiB) Viewed 15958 times
- Sept 15 (10).jpg (57.53 KiB) Viewed 15958 times
- Sept 15 (11).jpg (57.93 KiB) Viewed 15958 times
Re: Startin to work on the Clone Runner
Posted: Tue Oct 01, 2019 7:53 pm
by 71Beeper
Re: Startin to work on the Clone Runner
Posted: Sat Oct 26, 2019 11:59 pm
by 71440 gtx
wow
Re: Startin to work on the Clone Runner
Posted: Sun Nov 03, 2019 9:11 pm
by 71Beeper
Hi Kevin - I wondered when you were gonna chime in.
Anyway - more progress pics.
Here's the passenger side quarter being fit checked.
Oct 19 (2).jpg
Oct 19 (3).jpg
I'm going to be heading to the body shop on Nov. 11th to see the progress in person.
I haven't seen it since I dropped it off back at the end of August.
Re: Startin to work on the Clone Runner
Posted: Sun Nov 03, 2019 9:12 pm
by 71Beeper
What??? no pics?
Here's the pics.
- Oct 19 (2).jpg (54.74 KiB) Viewed 15761 times
- Oct 19 (3).jpg (47.83 KiB) Viewed 15761 times
- Oct 19 (4).jpg (62.8 KiB) Viewed 15761 times
Re: Startin to work on the Clone Runner
Posted: Sun Jan 26, 2020 11:35 am
by 71Beeper
Happy New Year Road Runner members!
So while my Runner is off at the body shop it's time to do some prepping of other parts.
Time to do the headlight buckets.
I didn't want to sandblast them - I decided to buy some Evapor-rust.
- 20200112_140039.jpg (170 KiB) Viewed 15337 times
And a container to put it in.
- 20200112_140032.jpg (105.84 KiB) Viewed 15337 times
Fill up the container and let it sit for a week or so.
- 20200112_140311.jpg (137.91 KiB) Viewed 15337 times
Re: Startin to work on the Clone Runner
Posted: Sun Jan 26, 2020 11:38 am
by 71Beeper
So the stuff is working pretty good!
- 20200118_123409.jpg (114.47 KiB) Viewed 15337 times
Use a little scrub brush to help it along.
- 20200125_114157.jpg (117.22 KiB) Viewed 15337 times
- 20200125_114209.jpg (125.8 KiB) Viewed 15337 times
I took the assembly apart to make sure it gets all stripped.
- 20200125_120833.jpg (150.11 KiB) Viewed 15337 times
- 20200125_120926.jpg (143.72 KiB) Viewed 15337 times
I'll let it soak for another week.
Re: Startin to work on the Clone Runner
Posted: Sat Feb 01, 2020 12:23 pm
by 71Beeper
While waiting for the Evaporust to do it's thing I'll get started on cleaning up the rear end housing.
I had painted the rear end housing in the car some years ago. I used something similar to Rust bullet.
If you look back to page one here you will see the fresh paint on it.
Even tho I wrapped it with plastic while blasting the underside of the car it still managed to get under the plastic and onto the housing.
- 20200125_123252.jpg (111.04 KiB) Viewed 15289 times
- 20200125_123302.jpg (104.09 KiB) Viewed 15289 times
So with a coarse scotchbrite pad it cleaned up pretty good.
- 20200125_131021.jpg (124.44 KiB) Viewed 15289 times
- 20200125_131037.jpg (117.62 KiB) Viewed 15289 times
So the next step is to prep it for a coat of satin black.