sorta new

[ct71rr]

Wow! It’s been about a year since my last update. Sorry about that. I did get some things done in that time. I also separated my shoulder back in August, that had me sidelined for a bit I had to get a replacement trunk as mine was pretty messed up. I took the replacement one apart, primed with epoxy and put it back together. I also had to add a 1/16” tig rod (welded on) to the edges. No matter how much I tried, I could not get the quarters and trunk lid to have a closer gap. I also leaded in the quarter seams and got most of the car in epoxy. Recently I have been working on the doors. Like the original trunk, damage and rust were hidden under tons of bondo. I took the doors apart, patched the issues, removed and/or treated the rust and got everything in epoxy. I also had to remove a large area of surface rust on the roof. Having a rotisserie made this a bit easier. I flipped the car over, built a tent around the roof with a plastic bin filled with Rust911. With a sump pump attached to a sprinkler, I ran this solution for about 24 hours until the rust was gone. Worked awesome.

43C53029-C894-4F73-8C83-E961DA30E4F6.jpeg (202.95 KiB) Viewed 74103 times

C5584EC4-BFB7-4FA6-9D99-D1913180702B.jpeg (186.63 KiB) Viewed 74103 times

9B753DAE-41C7-454B-A73C-4C4F9901815A.jpeg (149.74 KiB) Viewed 74103 times

89708589-E74B-45F6-8AB5-25FE43D3C0D0.jpeg (167.83 KiB) Viewed 74103 times

F21741A3-35EA-43FC-8A0C-17C1E8CC7658.jpeg (143.56 KiB) Viewed 74103 times

[ct71rr]

55634F20-986F-4AAE-A314-56EAE07B429B.jpeg (136.1 KiB) Viewed 74103 times

BCB2E55D-E208-428B-9457-DC1267F827A1.jpeg (146.24 KiB) Viewed 74103 times

B7A217D2-4F0B-43C3-A716-C7CD12BA8CA3.jpeg (197.65 KiB) Viewed 74103 times

40419AF8-7415-4712-ABAE-A775317851A1.jpeg (105.2 KiB) Viewed 74103 times

CD1308D8-27C0-4417-8EA7-F9EF5F41E758.jpeg (135.2 KiB) Viewed 74103 times

[ct71rr]

FA5070A7-1FD6-4682-920C-0CB0E0231CB4.jpeg (152.13 KiB) Viewed 74103 times

3BB1DD3C-D044-450C-B5E6-C34D4E780D76.jpeg (156.18 KiB) Viewed 74103 times

240F7F52-30B5-42E0-B7E2-F26215A57E42.jpeg (155.33 KiB) Viewed 74103 times

F0C74EAE-E235-4653-B43F-26A117C69139.jpeg (131.34 KiB) Viewed 74103 times

716F163E-9A47-455B-B9F6-788BB075623D.jpeg (120.55 KiB) Viewed 74103 times

[ct71rr]

0A81F4C9-0689-4BA5-90C8-C101E1BCD4D9.jpeg (173.03 KiB) Viewed 74103 times

05214036-6961-45C8-A152-1BA51F70F183.jpeg (172.38 KiB) Viewed 74103 times

1913889B-3055-4880-96C8-2F12AE2BBC62.jpeg (183.36 KiB) Viewed 74103 times

5EF771EE-26AB-44C2-BB1D-C16373044CBF.jpeg (159.05 KiB) Viewed 74103 times

1D591026-4718-49F5-A1B2-021D108653C9.jpeg (161.77 KiB) Viewed 74103 times

[ct71rr]

E38DF0E4-42EA-46A4-8FD8-8A22CEEEC55A.jpeg (133.01 KiB) Viewed 74103 times

59EA893E-6150-40C6-9FAD-FC3F3CB99CD7.jpeg (159.85 KiB) Viewed 74103 times

1590AC6B-3F56-4645-871C-35637F1659C6.jpeg (144.14 KiB) Viewed 74103 times

2BB6CE18-158B-4F0F-8B5F-7FE8E589847A.jpeg (137.81 KiB) Viewed 74103 times

2CAC38D0-C661-485C-8F40-407C61B65374.jpeg (173.57 KiB) Viewed 74103 times

[ct71rr]

E94D0401-7716-476F-B1A4-C4BB8BB7953B.jpeg (351.01 KiB) Viewed 74103 times

246437C7-2D6C-411C-92A3-DDBFEEABCCC5.jpeg (173.56 KiB) Viewed 74103 times

DC3C1365-67B6-45B9-99D0-8259E5909EC7.jpeg (161.13 KiB) Viewed 74103 times

21B2CC04-C18F-42F7-9391-A51F6CA7CE5B.jpeg (126 KiB) Viewed 74103 times

[ct71rr]

Time for my yearly update. I’ve been working consistently on my RR since the last post. I’ve had to basically rebuild my driver’s side fender and patch some spots on the passenger’s side. The front of the driver’s fender was covered in over 1” of bondo. Apparently it was hit hard in this area and crudely “repaired”. I ended up cutting this section off and grafting on a replacement section from a donor fender.

IMG_1873.jpeg (134.41 KiB) Viewed 56258 times

IMG_1884.jpeg (167.74 KiB) Viewed 56258 times

IMG_1918.jpeg (153.32 KiB) Viewed 56258 times

IMG_1960.jpeg (135.24 KiB) Viewed 56258 times

IMG_1968.jpeg (161.26 KiB) Viewed 56258 times

[ct71rr]

I also had to rebuild the driver’s headlight housing and both inner support braces.

IMG_1956.jpeg (144.07 KiB) Viewed 56253 times

IMG_2001.jpeg (145.87 KiB) Viewed 56253 times

IMG_2007.jpeg (139.56 KiB) Viewed 56253 times

IMG_2004.jpeg (158.09 KiB) Viewed 56253 times

IMG_2020.jpeg (221.22 KiB) Viewed 56253 times

[ct71rr]

IMG_2093.jpeg (209.5 KiB) Viewed 56252 times

IMG_2100.jpeg (187.91 KiB) Viewed 56252 times

IMG_2099.jpeg (205.41 KiB) Viewed 56252 times

IMG_2074.jpeg (354.52 KiB) Viewed 56252 times

IMG_2077.jpeg (299.99 KiB) Viewed 56252 times

[ct71rr]

And did some rust removal with vinegar:

IMG_2082.jpeg (196.95 KiB) Viewed 56250 times

IMG_2136.jpeg (180.29 KiB) Viewed 56250 times

IMG_2137.jpeg (175.51 KiB) Viewed 56250 times

IMG_2146.jpeg (178.32 KiB) Viewed 56250 times

IMG_2161.jpeg (176.55 KiB) Viewed 56250 times

[ct71rr]

On to gapping:

IMG_2190.jpeg (137.55 KiB) Viewed 56248 times

IMG_2627.jpeg (140.59 KiB) Viewed 56248 times

IMG_2630.jpeg (89.7 KiB) Viewed 56248 times

IMG_2641.jpeg (100.52 KiB) Viewed 56248 times

IMG_2642.jpeg (116.98 KiB) Viewed 56248 times

[ct71rr]

Fixing the rear valance:

IMG_2704.jpeg (103.38 KiB) Viewed 56247 times

IMG_2706.jpeg (117.39 KiB) Viewed 56247 times

IMG_2707.jpeg (112.47 KiB) Viewed 56247 times

IMG_2709.jpeg (153.11 KiB) Viewed 56247 times

IMG_2710.jpeg (154.87 KiB) Viewed 56247 times

[ct71rr]

On to the front valance. I had to use a donor because my original was a dented, twisted piece of rubbish:

IMG_2723.jpeg (144.8 KiB) Viewed 56243 times

IMG_2717.jpeg (110.12 KiB) Viewed 56243 times

IMG_2719.jpeg (126.01 KiB) Viewed 56243 times

IMG_2720.jpeg (123.85 KiB) Viewed 56243 times

IMG_2726.jpeg (154.83 KiB) Viewed 56243 times

[sdweatherman]

Awesome work!!!!

[ct71rr]

Thank you ! It hasn’t been easy, that’s for sure. I do enjoy making patch panels for some reason.