Road Runner Nest

Yes, those are the ones I'm referring to - Thanks 71_bronze_gtx.
Yes, I do know about the captive washers.
I wasn't sure of the thread size tho.

Guys - what is the thread size and length for the fender bolts?
I'm trying to round up some speed nuts and need the thread size.
I might as well get new fender bolts too
Thanks.

Excellent photos Scott!
I think you are correct on the color thing - but Legendary is sending me a sample of it to see if it will match my front seats.
In the meantime I'll have to bring the back seat down from the attic and compare the measurements you provided....

I'm going to bite the bullet and buy these.
https://www.legendaryautointeriors.com/ ... cloth-blk/
But first I have to inquire on the color.
I think my front seats are not white and black, but grey and black.
Like these.....

Much clearer picture there 72ROADRUNNERGTX!
The dimensions are nice and clear to read.....

Many Thanks Scott - I would appreciate if you can do that.

In my 71 Clonerunner - when I bought it- it had a rear seat from a 73 (with the buttons on the backrest). I will be purchasing the correct 1971 back and bottom cover for it in hounds-tooth color, as my front seats are hounds-tooth. My question is: can the 71 covers fit the 73 frame? or are the frame...

More glass bead.......

Now I know where some of the glass bead ended up........

Yesterday, I started on the front suspension. the torsion bars came out easier than I thought. March 30 (6).jpg March 30 (7).jpg Having the proper tool certainly helped. 20190324_141930.jpg Then, the 4 bolts holding the front K-member were next. I had to use the big bertha to crack them free. March ...

More progress today.
I got the rear end out and installed the dolly wheels. It's funny how the sand & glass bead still keeps coming out of her......

Now with no more grinding or sanding required by me, it's time to clean up the shop. I took down all of the 6mil poly plastic that I had on the walls and dividing the shop in half. It looks much bigger now. March 17 (5).jpg March 17 (6).jpg But of course looking at the other side of the shop - that'...

I bought an aftermarket setup from Stinger fiberglass.
Reviews on it says it's the best one for being aftermarket.
Here's the web page photo.

Guys; I'm in need of the mounting hole diagram for the Air Grabber setup.
I need to drill the mounting holes in my hood and need to know the correct positions as well as the correct position for the opening.
Anybody have that info?
The pics that I have seen online - the dimensions are blurry.

Thanks rr6pak, Yesterday I put down the final coat of epoxy primer on the whole inside of the Runner. I'm happy with the way it turned out. :D The next step.....to remove the front and rear suspension and get her on dolly wheels. March 2 (5).jpg March 2 (6).jpg March 2 (8).jpg March 2 (9).jpg March ...