Road Runner Nest

AMD does not make them... I see Sherman.. And even jegs has a metal brake
looking thingy... Has anyone used one of these.. Or have a better supplier?

My car has an inch of bondo on pass side lower from a very old accident repair..
The leading edge is crumpled...

Not to water this down... But long ago I had a 71 chrgr with sunroof code that didn't have the sunroof at all.. I was told this was somewhat common do to the outsourcing.. The car had 3 tags and was a fleet car.. Numbs matched the body.. Sound plausible?

I put a consle in one of my cars....I mesured for an hour before I cut my parts off... and come to find out there were dimples everywhere all over the tunnel...for line up. hope this helps.....i can get mesurements if neede. one last thing....I have noticed alot of crooked consoles( original factory...

here is somethng i just came up with...a jeep 90's grand cherokee has an identicle valve to a 71-72 cars....it even has the spot for the l bracket our cars use...(it slides over the brass sticky-out-thingy and then you hammer the brass flat) they are the same size and shape...the only difference I c...

I live in Somerset, Ky.....and have several 71-72 cars and lots of parts.....you are welcome to come by when in the area...e-mail me an I can send you my cell..... I met alot of folks at the nationals with 71-72 cars and they didn't or hadn't signed up on the nest??.....it is such a wealth of knowle...

I stock the stripe kit in matte black "Longitudinal Hood & Decklid
Stripes".....or I can make a stencil kit in low tack decal mask.

the stripe is $100 shipped
mask kit is $150 shipped

Take care scott

Whatthe heck is up with some of these hinges......i have 2 cars that the hoods are jacked up on....like on aerodynamic's car.

anyone pinpoint the problem with these hinges??

On the subject of using the front fender to patch with....

the lower rear quarter can be patched with the front fender (using the section in front of the wheel) the drivers side will patch the pass side rear...and so on...

never really rusts there either...take care all.... scott

Posted: Thu Nov 30, 2006 6:55 pm Post subject: FILTH REVIEW -------------------------------------------------------------------------------- You will need to get from a donor car: (parts from filth ave or aspen volare) spindles (dust shields) calipers rotors Things you may need to purchase: The lowe...

O.K. 71440 gtx I do have a question for you.....I am building a 72 roadrunner 4 speed with the short hump bench seat.. I have a hurst shifter, linkage and mount bracket from a truck ...they look very similar to what you have shown in your picture. the bracket is alittle different...but a fella at th...

O.K......man 71440 gtx.....that clears up alot for me.....thanks


I do have a question....where do I get the bench seat fourspeed
bracket....for my set-up?????

sounds like the screenprinted part of te decal is coming off....new vinyl
materials have a weather resistant UV coating that is hard for screenprinting
to stick too......this is my guess....great that they are standing behind
them...scott

are you talking about the bubble or the door?

here is something I was told??? since most new engines are roller motors....they have removed something like zinc and another metal substance from the oil because that these products caused increased emissions and WAS ONLY NESSESARY TO KEEP THE FRICTION DOWN ON OLDER ENGINES...like ours The fella we...

it is easy to get the correct tail shaft...and possibly the correct transmission... all of the late 70's and 80's dodge trucks have the 899 transmission and the gold is the rear tail shaft has duel mounts....with the rear mount being correct..... for a bench seat car you can use the shifter, shifter...