Search found 48 matches

by mrsnicks
Thu Nov 30, 2017 3:04 pm
Forum: Question and Answer
Topic: 71 roadrunner gas tank
Replies: 2
Views: 4905

Re: 71 roadrunner gas tank

Agree to replace the rubber lines. They go up to a canister and 1 line to the breather. Don't block them off.
by mrsnicks
Fri Sep 01, 2017 12:43 pm
Forum: Question and Answer
Topic: 71 SSP Charging system
Replies: 5
Views: 11207

Re: 71 SSP Charging system

The dash harness can be temporarily bypassed, connect the alternator output lead(Black-12ga) to the battery positive, provide +12V to the engine harness ignition run circuit, dark blue wire with a trace. If needed, providing +12V to the brown wire while cranking will by-pass the ballast resistor, a...
by mrsnicks
Wed Aug 30, 2017 8:34 am
Forum: Question and Answer
Topic: 71 SSP Charging system
Replies: 5
Views: 11207

71 SSP Charging system

So... I don't have my 71 SSP fully wired yet. I do have the following. 1. Engine bay harness installed 2. Direct battery wired run switch and push button starter (like on a run stand) 3. Voltage regulator mounted on the firewall My questions is this: What connections do I need to make so that the al...
by mrsnicks
Thu Mar 02, 2017 11:49 am
Forum: Question and Answer
Topic: Master Cylinder pushrod attachment
Replies: 2
Views: 4677

Re: Master Cylinder pushrod attachment

Thanks. That was my guess, but wanted to verify.
by mrsnicks
Wed Mar 01, 2017 2:22 pm
Forum: Question and Answer
Topic: Master Cylinder pushrod attachment
Replies: 2
Views: 4677

Master Cylinder pushrod attachment

1971 Plymouth SSP. Manual disc brakes. When attaching the MC pushrod to the pedel..

1. Which side is the rod on, compared to the pedal... Driver or Passenger?
2. Which side does the bolt go through... Driver or Passenger?


Need those questions answered or pictures.

Thanks.
by mrsnicks
Thu Sep 08, 2016 4:07 pm
Forum: Question and Answer
Topic: Steering Column Interchange
Replies: 1
Views: 4065

Steering Column Interchange

Will a P/S floor shift steering column out of a 1973 Satellite work in a 1971 Satellite?

I know in 73/74 the k-member underwent some changes. Would that affect the steering column interchange?


Thanks.
by mrsnicks
Tue Jun 14, 2016 9:26 pm
Forum: Question and Answer
Topic: Steering Column Conversion
Replies: 3
Views: 6258

Re: Steering Column Conversion

I was wondering if maybe a punch and a C-Clamp. Want to loan me your tool? :beer:
by mrsnicks
Mon Jun 13, 2016 1:23 pm
Forum: Question and Answer
Topic: Steering Column Conversion
Replies: 3
Views: 6258

Steering Column Conversion

So I've already changed my 1971 Plymouth SSP 318/auto from a column shift to a floor/slap stick shift at least from a transmission perspective. I have the parts to change the column itself over. In reading the FSM it seems there are 2 tools I should be using C-4044/Steering Shaft Remover and C-4113/...
by mrsnicks
Tue Jun 07, 2016 5:47 pm
Forum: Question and Answer
Topic: Please help with identification
Replies: 4
Views: 6254

Re: Please help with identification

Could be pinstriping tape effects.
by mrsnicks
Thu Apr 21, 2016 12:44 pm
Forum: General Discussions
Topic: Daddy's Stinky Car progress page - updated for 2022-23.
Replies: 92
Views: 721734

Re: Daddy's Stinky Car progress page - updated for 2015.

Been over a year.. Any update on the house, garage ... Car?
by mrsnicks
Tue Mar 29, 2016 1:11 pm
Forum: General Discussions
Topic: Mopars at the Rock! April 2nd 2016
Replies: 1
Views: 3997

Mopars at the Rock! April 2nd 2016

Rockingham, NC Dragway. Saturday April 2nd. Drag racing, swap meet and car show.

I'll see you there!

http://www.rockinghamdragway.com/2016/m ... -the-rock/
by mrsnicks
Sun Mar 27, 2016 6:51 pm
Forum: Question and Answer
Topic: 71 Road Runner amp gauge conversion (rallye Dash)
Replies: 10
Views: 12407

Re: 71 Road Runner amp gauge conversion (rallye Dash)

Look at some of the older Stewart Warner gauges.
by mrsnicks
Fri Mar 18, 2016 11:39 am
Forum: Question and Answer
Topic: Aluminum Radiators
Replies: 17
Views: 24236

Re: Aluminum Radiators

Now that I have widened the lower mounting tabs, the radiator is bottoming out on the lower radiator support before the top slots line up with the upper mounting holes.

Anyone else had this many problems with a Champion EC 374?
by mrsnicks
Thu Mar 17, 2016 10:43 am
Forum: Question and Answer
Topic: Aluminum Radiators
Replies: 17
Views: 24236

Re: Aluminum Radiators

I pulled the trigger on a Champion EC374, 2 row, 26" aluminum radiator.

The bottom mounting tabs should be 28" on center, but it's 27.5". Guess I'll have to break out the jigsaw and widen the openings.

Patrick
by mrsnicks
Thu Feb 25, 2016 11:53 am
Forum: Question and Answer
Topic: Gas Tank
Replies: 7
Views: 9304

Re: Gas Tank

It's the exact same one I have in my 71 Charger.. same 4 side vents. CR10A

I'll crawl under my Satellite tonight when I get home.