Road Runner Nest

A bit of an update to an old thread,
https://youtu.be/uPoL9DZWsI8

Not sure that’s the correct delay relay (U) for a ’71 B-body, bracket does not look correct for a mounting where the diagram indicates. I know in ’72 the lights on buzzer (U) is located there as well as the seat belt warning relay (BE), again this engineering diagram indicates only after Jan ’72 for...

The four holes across the rear are larger, bell nuts were used there. There are a few locations where the under structure will need access holes. Other than the four across the rear, all other stub nuts secured the bubble to the outer skin only.

Email me then, doug@72rrgtx.com

I posted some pictures of my template on that old Moparts thread. If you are still in the need, send me PM, I can email a scan to scale of the template I made and have used several times. Fairly easy mod.

Steering column? No, does not need to be removed. Unbolt the master cylinder from the booster, disconnect the push rod from the pedal, pull the pivot pin on the rod lever, don’t attempt to remove the lever and rod from the booster while the booster is in the car. Remove the four nuts on the booster ...

Thank you on the compliments. I believe member junkman is from Anacortes, the pictures he posted of his EV2 RR/GTX appear to have been taken around there. More pictures? OK, here are some from this past summer. National W.P. Chrysler club meet, drive/cruise up to Mt. Rainier National Park, Edmonds c...

There are a few old threads here on this forum addressing the ’72 v21 & v25 issue, do a search. Appears the v25 code was not included in the fender tag on RMs with N96. Satellites showed both codes.

I would feel around under the anti-freeze sticker, have seen some core support stampings in the top of the core support. The smaller numbers are just part identifiers or part numbers for the core support pieces.

I see V21 (hood stripes), not seeing V25 (deck lid Stripes). Reads like they need to be ordered together. If you look at the details of the original deck lid stripe I posted, you can see some differences.