Road Runner Nest

The Alt. bracket goes to the motor mount. 440 does not use the little black bracket mounted to the front of the right head.

Here is the setup.

Classic has the plate and linkage for 100.00. Buy them when they have 25% off for 75.00

It looks like I already have the plate on the engine side of the firewall. Anyone have one of the brake pedal linkages for sale? Found this, http://www.ebay.com/itm/331541668819?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT , but don't need both and don't want to spend that much. Thank...

Will need the backing plate for power that goes on the firewall. Also will need the bell crank linkage that goes on the pedal.

Does it have the vinyl top trim or at least the holes for it? Sunroof cars had vinyl tops.

The code would be M51

Hot water valve takes vacuum to close it. Default mode is always hot and defrost. That way if it losses vacuum then the system goes the hot defrost.

Yes you are correct. Should have a vent cable for the pass side as well as the drivers side.

Here are the RR Decor seats.

Also those are Challenger seat covers and probably the frames are too so that's probably the problem.

Those are 71 RR with Decor interior upper panels.

No. Totally different setup. Different width and style.

No they are different but can make the left side work. I'll get some pictures of one that we are doing now.
Also what year is your car? The right side plate being made is for 71-2. 73-4 is different. Also we got one off of e-bay for 130.00

You can buy the right side core plate but the left side is also different between 22" and 26". Just did this on a customers car. 1/2" difference on the left side. FPM also shows different plate on the left but everyone thinks you just need to change the right side..