Road Runner Nest

one word plastigauge?
if the plastigauge says your good your good.

yes autometer makes a replacement speedometer but will not fit in the rally or stock bezel fixture

you will have to make a replacement if you want new or you can have www.redelinegaugeworks.com rebuild the speedometer just like new.

also if you have questions you can email these guys on air grabbers

http://www.stingerfiberglass.com/produc ... abber.html

Ideally it was marketing strategy. The gtx was the chrysler division's answer to gmc's gto. They came up with something to fight back for car sales. And as it progressed through history with the pettys becoming a major mopar driving force. The GTX became a luxury muscle car vehicle it was very nicel...

To correctly do a drivetrain for performance. You should profile it from the flywheel back. There are several ways to improve take off time. Suspension Transmission Differential Remember if you increase the ratio ie 2.76 2.71 2.79 to a 3.23 3.55 etc the higher the number the higher the rpm will need...

there is a adjustment screw on the steering box itself make sure the adjustment shaftis adjusted correctly and that you are getting proper flow to the worm and sector of the steering column. if steering is sloppy with a wide ratio before the turn iniated you amek need to tighten the adjustment shaft...

the bearings insde the axle tubes i usually hand pack them with a stout molybdium base racing grease

check your load draw to the lights the fusable link and the switch itself sounds likea amperage problem that is causing the lights to dim. if everthing is fine calculate total electrical usage amd make sure you are running the correct alternator for your needs and regulator.

adding a manufactured spoiler isnt really custom it is mounting a prefabricated spoiler on my car my active aerodynamics the chin spoilers and the tail spoilers are all hand made and shaped

i have both the flex fan and dual electric fans as pushers that are auxilliary controlled manually to cool my trans cooler radiator and fuel cooler. the fans are different sizes and staggered

not ripping on anything just figured i would post some piston info that is all...

here is somthing cool. i thought i would share
i scanner this pic it goes from left to right
340 piston 360 piston 318 piston
now if you notice the 318 and 340 piston have similiar properties however the same casting and processes werent used with the 360..i dunno why

oh ok cool... you know though.. a lot of guys opt for the 360 but i have found..if you want to make a very respectable street engine for less..and dotn mind putting the money into it..i have gotten 400-500hp out of a good ole 318..and the kicker i can usually find em for about 200-500 dollars runnin...

the sales brochure page for the 1971 satellite from the roadrunnernest site...
http://www.roadrunnernest.com/Images/Br ... /sat20.jpg

anyone catch on this "1971" roadrunner he has 440 stickers on the simulated callouts and inside the engine bay it is a 360 smallblock check the distributor position it also says in the video it is a 360. now my memeory may be off. but i think the smallest engine that was available for the roadrunner...